USE THIS FORM
TO ASK
TOM A QUESTION.

INDUSTRY ALERTS are collected from the top sources in the heavy equipment industry and are sent only when there is news you can use.  

Sign up here for the ALERT in this form  -- and mention ALERT in the Message Box at the bottom.


1.  Name

1. Name


2.  Email

2. Email


3.  Country

3. Country


4.  Phone Number

4. Phone Number


5.  Message / Comments / Questions

5. Message / Comments / Questions


Product Information
                               DRESSTA NORTH AMERICA CONSTRUCTION MODELS

CLICK on each product number for further information.

TD7   --  Dressta's TD7M 85-net hp conventional drive small crawler features a power train that combines a torque converter with clutch-brake steering. With the blade attached the machine remains in the 8-ft. 6-in. width for transportation limits. A Direct Drive version with 3-speed powershift transmission and no torque converter is available.

TD8   --  The TD8M conventional drive small crawler with 85-net hp features a power train that combines a torque converter with clutch-brake steering. With blade attached, the dozer is within the 8 ft. 6 in. width limit for transportation. A Direct Drive version with 3-speed powershift transmission and no torque converter is also available.

TD9  -- Dressta's TD9M is a conventional drive small crawler with 93 net hp. The power train combines a torque converter with clutch-brake steering. With the blade attached, the machine size remains within 8 ft. 6 in. width. The TD9M is also available in a Direct Drive version with a 3-speed powershift transmission and no torque converter.

TD10 --Dressta's TD10M is a conventional drive small crawler with 101 net hp. The power train combines a torque converter with clutch-brake steering. Even with the blade attached, the overall machine size remains within the 8-ft. 6-in. width limit. The TD10M is also avilable in a Direct Drive version that uses a 3-speed powershift transmission with no torque converter.

TD15 --The TD15M Extra with 6-way blade is available in two versions: the Wide Track and the LGP (low ground pressure). The Wide Track is limited to 22-in. shoes while the LGP version can mount 26-, 28- or 30-in. offset shoes. Blade options include: 5-cu.-yd. 6-way (Power Angle Tilt) blade for the Wide Track; 5.23-cu.-yd. 6-way (Power Angle Tilt) blade for the LGP

TD15 -- The TD15M Extra Landfill dozer is configured for severe landfill operations. The 190-hp dozer is available in three track versions: standard, long track and low ground pressure. The units feature a single lever joystick control which also controls the transmission speeds. Blade options include: 14.3-cu.-yd. Semi-U blade; 10.7-cu.-yd. straight blade for the low ground pressure version.

TD20

The TD20M Extra series comes in standard, long track and low ground pressure track versions with operating weights from 52,139 to 54,410 lbs.

  • Cummins Tier III electronic control engine delivers 240 net hp with 870-lb.-ft. maximum torque
  • Transmission allows the operator to pre-select travel speed and downshift functions from a left-hand, single-lever joystick control
  • Various blade options, winches and rippers available

TD20 --  The TD20M Extra Landfill dozer is configured for severe landfill operations. The 240-hp dozer is available in three track versions: standard, long track and low ground pressure. The cooling module features replaceable sections and a hydraulically drive, automatically reversing air-flow fan. The dozer has a single lever joystick control which also controls the transmission speeds. Blade options include: 15.6-cu.-yd. Semi-U blade; 18.3-cu.-yd. Full-U blade with increased capacity for standard and long track versions; 17-cu.-yd. Straight blade for the low ground pressure version.

TD25 --

  • Powered by Cummins QSX15 fully-electronic, Tier 3 certified engine that delivers 330 hp at 1,800 rpm
  • Maximum torque of 1,346 lb./ft.
  • Ne modified cooling module with new variable spped, hydraulically driven fan
  • New system of preset travel speed selection and auto-downshift

TD25 --  The TD25M Extra Coal Dozer has an operating wight of approximately 88,700 lbs. and is designed for operation in power plants and coal handling facilities. The dozer features a 15L, fuel efficient engine meeting emission requirements and delivering 330 net hp or 370 net hp with minimum fan use. The cooling module features replaceable sections and a hydraulically driven, automatically reversing air-flow type swing-out fan. The TD25M Extra has a pilot control system with a single lever joystick control that manages the transmission and automatic up and downshifting modes available. The blade is a heavy-duty 32-cu.-yd. coal blade with pitch and tilt and can be configured with skid shoes. Coal handling options include bigger alternators, air precleaner, more lighting, additional MSHA air filtration for the operator, wide track shoes with cleanout holes, counterweight or rippers.

TD25 -- The TD25M Extra landfill dozer has an operating weight of 92,000 lbs. The dozer has a 330 net hp (246 kW)/370 net hp (277 kW) with minimum fan use. The cooling module features replaceable sections and a hydraulically driven automatically reversing air-flow, swing-out fan. A single lever joystick control also controls the transmission speeds. Blade options include a 23.3- or 26.9-cu.-yd. Semi-U landfill blade; a 27.9- or a 33.4-cu.-yd. Full-U landfill blade with complete see-through trash rack.

TD40 -- The TD40E Extra crawler dozer is designed for heavy construction, mining and other high production operations and has a 136,509-lb. operating weight. The dozer is powered by a 19L fuel efficient engine that meets emissions requirements and delivers 515 net hp (384 kW)/555 net hp (415 kW). The dozer features a pilot control system and available automatic up and downshifting modes. Blade options include a heavy-duty 24.3-cu.-yd. Semi-U blade or a 29.8-cu.-yd. full U blade.

TD40 -- The TD40E Coal Dozer is designed for operation in power plants and coal handling facilities and has an operating weight of approximately 151,000 lbs. The unit features a strong frame and power-train and a 19L, fuel efficient engine meeting emission requirements and delivering 515 net hp (384 kW)/555 net hp (415 kW) with minimum fan. The cooling module features replaceable sections and a hydraulically driven automatically reversing airflow type swing-out fan. Blade options include a heavy-duty 62-cu.-yd. coal blade with pitch and tilt and can be configured with skid shoes if desired. Coal handling options include bigger alternators, air precleaner, more lighting, additional MSHA air filtration for the operator, wide track shoes with cleanout holes, counterweights or rippers.

560 --

The 560E Extra has a Cummins QSX-15 turbocharged, in-line six-cylinder engine that generates 427 net hp, or up to 445 hp at minimum fan speed, thanks to its variable-speed cooling fan.

  • Features a three-speed, full powershift, countershaft transmission, torque converter, front and rear drive axles and conventional differentials
  • Directional transmission and speed shifts controlled by two levers at the operator's fingertips
  • Hydrostatic steering
  • Z-bar linkage
  • Four-wheel, hydraulic, multiple wet-disc brakes (C-Series)

555 -- The 66,380-lb. 555C Extra features a 10.8-liter, turbocharged, in-line six-cylinder Cummins QSM11 engine delivering 319 net hp at 2,100 rpm or 330 net hp with minimum fan usage.

  • Maximum torque of 1,235 lb.-ft. at 1,400 rpm
  • Available with buckets ranging from 5.5 to 11 cu. yds.
  • Electrically controlled, full powershift, four-speed countershaft transmission
  • Features include hydrostatic steering, single-lever hydraulic controls, internal wet disc brakes and a variable-speed cooling fan
QUALITY YOU CAN BELIEVE IN
Copyright ©2010 Dozer Parts Warehouse   PHONE: 630 457 0146
Tom@DozerPartsWarehouse.com